EcoFlow - TITAN 5000 Whole-Home Battery Backup, 7.2kW 120/240V, 5–30kWh

7.2kW of 120V/240V split-phase power — enough to start and run a compatible 3-ton central AC with the rest of your home, with no soft starter.

The EcoFlow TITAN 5000 is the power model in EcoFlow's TITAN home battery series. Its 7,200W, 120V/240V split-phase output starts and runs a compatible 3-ton central air conditioner, your refrigerator and the rest of your home together — no soft starter needed. A 5 kWh LFP battery is built in and expands to 30 kWh, it takes up to 4kW of solar directly, and with the Smart Home Panel 10 (240V) it backs up 10 selected home circuits automatically and works with the grid and existing rooftop solar to cut your electric bill every day. EcoFlow built it on a 200V platform with high-rate 2C LFP cells and silicon-carbide power electronics so you get installed-home-battery performance at a fraction of the traditional cost.

At a glance

Why the TITAN 5000

• Whole-home backup, including your AC: 7.2kW of 120V/240V power runs a compatible 3-ton central AC, refrigerator and the rest of your home at the same time, with no soft starter needed. Even without solar, it keeps critical loads running.
• Whole-home savings: Working with the grid and solar through Smart Home Panel 10, EcoFlow estimates savings of up to $2,900 a year with payback in about 3 years (see the note below for how EcoFlow calculated it).
• About 30% of the cost of a traditional system: An industry-first 200V architecture, custom high-rate 2C LFP cells, silicon-carbide (SiC) power electronics and a factory pre-wired Smart Home Panel 10 cut cost across purchase, installation and long-term use.
• OASIS 3.0 energy manager: Learns your household's habits, forecasts solar up to 3 days ahead, charges off-peak and powers your home at peak rates. 10-circuit control lets you direct backup power where it matters most (some features are an EcoFlow app subscription).
• Storm Mode: Turn it on and TITAN alerts you and charges to 100% ahead of severe weather, switches to battery in under 20 ms when the grid drops, and can trim non-essential circuits to stretch your backup.
• North America's highest safety standards: UL 9540 certified and tested to UL 9540A, with EV-grade LFP cells, 24/7 battery management monitoring and a 5-year warranty.

Please note: AC coupling with an existing rooftop solar system requires the Smart Home Panel 10 (240V) and a CT sensor.

Three ways to keep it charged

• Solar: connect compatible panels directly to TITAN's solar input — this keeps working during an outage, unlike a grid-tied rooftop system that shuts down for anti-islanding protection.
• Wall / grid: charge from AC with the included cable, or let OASIS 3.0 charge when electricity is cheapest.
• Generator: EcoFlow rates TITAN about 99% compatible with generators, EcoFlow or third-party, using the included AC charging cable.

Home integration with Smart Home Panel 10 (240V)

TITAN works on its own — plug appliances straight into its outlets. Add the Smart Home Panel 10 and it connects to up to 10 selected household circuits for automatic backup in 20 ms or less, circuit-by-circuit control in the EcoFlow app, and (on TITAN and TITAN Plus) everyday energy management with the grid. The panel arrives factory pre-wired with breakers, monitoring and a built-in CT sensor, so your electrician has less to source and assemble on site. Installing and wiring the panel into your home requires a qualified, licensed electrician. Already have rooftop solar or another home battery? With the panel, TITAN uses AC coupling to work alongside compatible existing equipment instead of replacing it.

Built to cost less over its life

• 200V platform, 2C cells: higher voltage and lower current deliver more power with less heat; LFP and larger cells mean more balanced charging and fewer potential points of failure.
• SiC power electronics: the same silicon-carbide semiconductor technology used in modern electric vehicles.
• 3D integration: more power in less space, with fewer connections.
• Modular and movable: start at 5 kWh and add batteries as needs grow, with plug-in connections. Moving house? Take TITAN and its batteries with you — only the hardwired panel needs an electrician.

Bundle options

• TITAN 5000: The main unit on its own.
• + Smart Home Panel 10 (240V): Adds the 10-circuit smart panel for automatic whole-home backup, circuit control, grid savings and AC coupling with existing solar. Panel installation requires a licensed electrician.
• + 2 × 220W Portable Solar Panel: Two EcoFlow 220W bifacial portable panels to recharge straight into TITAN during a long outage.
• + 2 × 400W Portable Solar Panel: Two EcoFlow 400W portable panels for faster solar recharging.

Need more runtime? TITAN accepts up to five TITAN Battery 5kWh expansion batteries (sold separately — contact us for availability).

Compare the TITAN series

TITAN 5000 specifications

What's in the box

• EcoFlow TITAN 5000 ×1
• EcoFlow Solar to HP500 Charging Cable ×1
• EcoFlow AC Charging Cable-C20 ×1
• Quick Start Guide ×1

Savings note: EcoFlow's estimate is based on a 15 kWh TITAN 5000 system with Smart Home Panel 10, 4kW of solar, about 16.5 kWh of daily household use, optimized solar self-consumption and SDG&E TOU-DR2 rates in San Diego, CA. Your savings and payback will depend on your home, solar production, rate plan and how you use the system.

Performance figures are EcoFlow's, based on its internal testing under specific conditions; actual results vary with configuration, connected loads, usage and environment. Check startup (surge) requirements for large appliances and medical equipment before relying on backup power.