Kappler ChemTape Chemical Resistant Tape - 60yd Length x 2" Width

Kappler’s patented, chemical-resistant ChemTape® is a PPE necessity. It provides critical reinforcement by sealing the gaps, referred to as “interfaces,” where your hazmat suit meets your gloves, boots, and the edge of your respirator or gas mask facepiece. It helps to maintain a near airtight environment inside your suit while allowing you to stay mobile. ChemTape® is easy to use, highly effective and has a practically unlimited shelf life when stored in proper conditions.

Key Features of Kappler ChemTape®:

• Patented protective tape with a polyisoprene-based (rubber) adhesive
• Protects against splashes, aerosolized threats, and exposure to particulates at the vulnerable interfaces in your PPE gear
• Compatible with level A, B, and C garments
• Compatible with NFPA garments
• Can be applied and removed without damaging reusable protective garments
• Each roll is 60 yards long and 2” wide. Rolls are packaged individually.
• High-visibility yellow is ideal for dangerous situations and easy visual identification
• Tested in accordance with ASTM F739, demonstrating a holdout time of at least 160 minutes against the entire battery of the ASTM F1001 list of 15 liquids.
• Tested per MIL-STD-282 against chemical warfare agents Nerve (VX), Sarin (GB), and Mustard (HD) with a minimum holdout time of 8 hours.
• Manufactured in the USA

Technical Specifications:

Kappler ChemTape® is designed specifically for use with protective apparel.

Ideal for taping around gloves, boots, respirators, and storm flaps, ChemTape® can also be used as a means of identification thanks to its high-visibility yellow color, as well as for shelter-in-place applications. It’s even suitable for pipe sealing and shelter or tent repair.

ChemTape® is primarily designed to enhance the liquid holdout of interfaces and closures on protective garments. It can also reduce the potential of gross liquid flow at interfaces. It should NOT be relied upon to provide a liquid-tight seal, but it can dramatically improve protection from liquid threats, splashes, aerosols, and particulates. 

ChemTape® is 2 inches wide with pressure-sensitive adhesive, ensuring wide and direct coverage when applied, with only the tape’s flat edge exposed to airborne threats that could degrade the adhesive. Once applied, it will remain firmly adhered yet can be removed without damaging reusable protective garments. 

ChemTape® provides exceptional protection from a full battery of chemical, biological, and gas threats. 

Application:

Kappler ChemTape® should be stored according to the storage directions below until needed. ChemTape® performance is largely dictated by its proper application, so take care during this process. Before application, make a general measurement of the area to be taped. Wherever possible, use a single strip of tape instead of multiple patches. Unroll the ChemTape® while taking care not to wrinkle or fold it. Apply with an especially high degree of force as the adhesive is pressure-sensitive, and ensure the entire width of the tape adheres to the desired area. Inspect after application. If applied correctly, ChemTape® will be relatively flat without wrinkles or folds. 

Storage:

Store Kappler ChemTape® in a cool, dry place away from direct sunlight. The ideal storage temperature is 73ºF (23ºC). According to the manufacturer, there is no evidence that ChemTape® loses its protective characteristics, including adhesion, when stored in ideal conditions. ChemTape® may be stored at temperatures of up to 120ºF (49ºC). Note that high temperatures may lead to faster degradation. 

Return Policy:

For MIRA Safety products, we adhere to the MIRA Safety return policy, prioritizing the safety and wellbeing of our customers above all else. Given the critical nature of the products we offer, and to ensure their integrity, we do not accept returns once items have shipped from our warehouse. This policy safeguards our customers, ensuring the PPE they receive is uncompromised and untampered.